BC Tetra 220s
The BC Tetra V220s has a slim main body that is 20mm high with a unique way of mounting your fpv on the front that allows for pretty much any standard size (and a few non standard sizes as well)
The frames body can happily hold a Naze, Wii or KK size board, it's your choice.
Of course it being a V-Tail you get that extra bit of Yaw and that extra bit of cool.
The arms keep the motors and props up high, reducing the chance of damage in a hard landing, while also acting as the landing gear.
Included are 2 Bungeecow Pat Anti Vibration Gel Pads to go underneath your Mobius.
There is a Lipo tray designed to protect the lipo and the snug fit means you don't have to strap it in.
Specifications:
  • Frame Material G10
  • 220mm Motor to Motor
  • 210mm wide
  • 225mm long
  • 60mm high (minimum height)
  • Weighs 150g
Included in the kit:
  • 1 x Top Plate 1.5mm G10
  • 1 x Bottom Plate 1.5mm G10
  • 4 x Arms Plates 1.5mm G10
  • 4 x Motor Plates 1.5mm G10
  • 1 x Camera Mount Plate (Small) 1.5mm G10
  • 1 x Camera Mount Plate (Large) 1.5mm G10
  • 2 x Bungeecow Pat Anti Vibration Gel Pads
  • 18 x Black Nylon M3x20mm Standoffs
  • 20 x Black Nylon M3x30mm Standoffs
  • 4 x Black Nylon M3x25mm Standoffs
  • 4 x Black Nylon M3x6mm Standoffs
  • 12x Black Nylon M3x5mm Bolts
  • 72 x Nylon M3x10mm Bolts
  • 8 x Steel M3x10mm Bolts
  • 4x Dampers for landing
*Hardware and specifications are subject to change as these frames will evolve as improvements are made.